The stunning new Raspberry Pi 3 Model B+ has landed at ModMyPi! This new and improved version of the third generation model maintains the same popular board format as the Raspberry Pi B+, 2, and 3 but boasts an even faster 1.4GHz 64Bit SoC, and the addition of 5GHz WiFi, faster ethernet & POE capability (via POE HAT sold separately).
We only stock UK made Raspberry Pi’s manufactured in Sony’s Pencoed factory in South Wales.
Please Note. It is recommended to use a 2.5A Power Supply with the Raspberry Pi 3 B+. This purchase is for the Raspberry Pi 3 Model B+ Board only.
Broadcom BCM2837B0 chipset.
1.4GHz Quad-Core ARM Cortex-A53 (64Bit)
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)
4 × USB 2.0 ports
Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.
Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT
85 x 56 x 17mm
5V/2.5A DC via micro USB connector
5V DC via GPIO header
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
10/100 BaseT Ethernet socket
HDMI (rev 1.3 & 1.4)
Composite RCA (PAL and NTSC)
Audio Output 3.5mm jack
USB 4 x USB 2.0 Connector
40-pin 2.54 mm (100 mil) expansion header: 2×20 strip
Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines
15-pin MIPI Camera Serial Interface (CSI-2)
Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
Memory Card Slot
Push/pull Micro SDIO